Authors
Program No.
Title (link to full paper)
Baudouy, B.J.P
LIA-01
Coupling Current Time Constants Of Different Sub-cable Stages for a NbTi Cable-In-Conduit Conductor
Sasaki, T
LIA-02
Mechanical Behavior of Strands in CICC analyzed by Monte Carlo Method
Miyauchi, M
LIA-03
Numerical Stability Analysis of Forced Cooled Superconductor with Subchannels
Takigami, H
LIA-04
Predicted Performance of the ITER Central Solenoid Model Coil Conductors
Takigami, H
LIA-05
Cooling Simulations for the ITER Toroidal Field Coils and Cryoplant
Jeong, S
LIA-06
Current measurements of the individual strands in CICC magnet
Balsamo, E.P
LIA-07
Experimental study of the current redistribution inside the NbSn CICC of an ITER relevant magnet in pulsed operation
Yonekawa, H
LIA-08
Non-Uniform Current Distribution in Superconducting Cables Exposed to External Magnetic Field and Its Influence on Stability
Ninomiya, A
LIA-09
Experimental Investigation on Current Imbalance of Stranded Conductor
Kawabata, S
LIA-10
Current Distributions at Steady-State of Superconducting Conducting Cable Conductors for AC Use
Kawabata, S
LIA-11
Current Distributions at Steady-State of Superconducting Cable Conductors for AC Use
Akhmetov, A.A
LIA-12
Influence of the Defect in the Strand on the Ramp Rate Sensitivity of the Superconducting Cable
Akhmetov, A.A
LIA-13
Ramp Rate Limitation of the Magnet Made of a Flat Superocnducting Cable
KAZUTAKA, S
LIA-14
Numerical Analyses for Ramp Rate Limitation from a Standpoint of Heat Generation during Current Redistribution
Mikkonen, R
LIA-15
Philosophy of a quench; two case studies - LTS wiggler magnet and HTS µ-SMES
Kovner V.S.
LIA-16
Stationary Normal Domains in Current-Carrying Composite Superconductors
Takao, T
LIB-01
Recent Technical Trends of Superconducting Magnets in Japan, Part II: Stability and Quench Characteristics
Emoto, M
LIB-02
Computer Simulation for Stability Analysis Using One-dimensional Model
Blau, B
LIB-03
Effect of Central Channel Porosity on the Stability of Full Size ITER-Type CICCs
Zanino, R
LIB-04
Effects of bundle-hole coupling parameters in the two-fluid thermal-hydraulic analysis of two-channel cable-in-conduit conductors
Marinucci, C
LIB-05
Stability margin of the ITER TF and CS conductors computed with the Gandalf code
Marinucci, C
LIB-06
Anghel A
LIB-07
An investigation of inner heat input in CICC with central channel by the Super High Frequency method
Oh, S.S
LIB-08
Numerical Analysis of Stability Margin and Quench Behavior of Cable-In-Conduit NbTi Conductor for KSTAR
Ozaki, O
LIB-09
Quench simulation code for superfluid helium cooling magnets. - Quench protection of 1GHz NMR magnet -
Balsamo, E
LIB-10
Stability and quench propagation in a long length NbTi CICC
Noguchi, S
LIB-11
Transient Stability of Large Aluminum Stabilized Superconductors
Kim, Y.H
LIB-12
KSTAR CS Model Coil Data Acqusition and Quench Detection System
Kim, S.W
LIB-13
Qualitative model for MQE of a superconducting cable
Ando, T
LIC-01
Fabrication of ITER Central Solenoid Model Coil - Outer Module
Fabian, P.E
LIC-02
Electrical Insulation Systems for the ITER Central Solenoid Model Coil
Sugimoto, M
LIC-03
R&D activity of SABGO avoidance for the CS insert fabrication
Mito, T
LIC-04
First Cool-down Performance of the LHD
Imagawa, S
LIC-05
Design of Cooling and Venting Lines of Helical Coils for LHD
Takayasu, M
LIC-06
ITER Niobium-Tin Strands Reacted Under Model Coil Heat-Treatment Conditions
Ciazynski, D
LIC-07
Fabrication and Test of the First European Full-Size Sample for ITER
Ciazynski, D
LIC-07
Fabrication and Test of the First European Full-Size Sample for ITER
Kim, S.H
LIC-08
Performance Test of the KSTAR Central Solenoid (CS) Model Coil
